ARTC CoP Track Vehicle Operator

Entry Requirements Section

In alignment with industry consultation and the job role expectations, the following is needed for course admission:

• A valid Category 1 Rail Medical assessment
• CPCWHS1001 Prepare to Work Safely in the Construction Industry 
• TLIF0020 Safely Access the Rail Corridor
• TLIF0027 Perform lookout duties
• TLIF2082 Perform handsignaller duties
• TLIW0007 Operate under track protection rules
• TLIF2097 Use audible track warning devices
• TLIF3083 Conduct track protection assessment
• TLIW2037 Clip and secure points
• TLIL0010 Implement track occupancy authority
• TLIC0025 Pilot rail traffic within work on track authority limits
• TLIC2054 Access rail track to run track vehicle within defined limits
• TLIL3083 Implement a track work authority and manage rail traffic through worksites
• TLIL3084 Implement a local possession authority
• TLIL4069 Plan and coordinate protection for multiple worksites within limits of a work on track authority
• ARTC CoP Handsignaller
• ARTC CoP Track Worker Level 1
• ARTC CoP Track Worker Level 2
• ARTC CoP Track Worker Level 3
• ARTC CoP Track Worker Level 4

 As well as one of the following roles and associated units of competency:

Road-Rail Plant Operator 

• TLIC3045 Operate a road/rail vehicle 
• TLIC2054 Access rail track to run track vehicle within defined worksite 

• TLIB0012 Maintain and use hand tools 
• TLID0020 Shift materials safely using manual handling methods
• TLIE1003 Participate in basic workplace communication
• TLIF0025 Follow work health and safety procedures
• TLIF2010 Apply fatigue management strategies
• TLIB2085 Apply track fundamentals
• TLIU2008 Apply environmental procedures to rail infrastructure
• TLIC2054 Access rail track to run track vehicle within defined worksite
• and either 
• TLIC0010 Propel and operate light on track equipment 
• OR
• TLIC2058 Travel medium or heavy self-propelled on-track equipment

Rail Bound Plant Operator Light – National

• TLIB0012 Maintain and use hand tools
• TLID0020 Shift materials safely using manual handling methods
• TLIE1003 Participate in basic workplace communication
• TLIF0025 Follow work health and safety procedures
• TLIF2010 Apply fatigue management strategies
• TLIB2085 Apply track fundamentals
• TLIU2008 Apply environmental procedures to rail infrastructure
• TLIC2054 Access rail track to run track vehicle within defined worksite
• TLIC0010 Propel and operate light on track equipment 

Rail Bound Plant Operator Heavy – National

• TLIB0012 Maintain and use hand tools
• TLID0020 Shift materials safely using manual handling methods
• TLIE1003 Participate in basic workplace communication
• TLIF0025 Follow work health and safety procedures
• TLIF2010 Apply fatigue management strategies
• TLIB2085 Apply track fundamentals
• TLIU2008 Apply environmental procedures to rail infrastructure
• TLIC2054 Access rail track to run track vehicle within defined worksite
• TLIC2058 Travel medium or heavy self-propelled on-track equipment

Delivery Mode Section (Website)

This course begins with four days of trainer-led classroom learning, where you will develop the knowledge and skills required to safely perform the roles requirements. During the classroom component, you will complete knowledge assessments to demonstrate your understanding.
 
Following the classroom training, you will be required to complete an in-field logbook in your workplace. This practical experience must be organised by you and completed under the supervision of a qualified workplace mentor, who will verify your competency in performing the required tasks.
 
Once your logbook has been completed, you will return to TICRail to undertake a final practical assessment, where one of our qualified assessors will observe your skills and confirm your competency against the requirements of the unit.

Please note that the final practical assessment is booked separately and attracts an additional assessment fee.

Assessment Information Section (Website)

• Knowledge assessments: Written tests to evaluate participants' understanding of the course material.
• In-field logbook: Participants complete tasks under the supervision of a qualified mentor, documenting their experiences and competencies in a logbook.
• Practical observation assessments: Hands-on activities where participants demonstrate their skills in a controlled environment.